C6-V3 FULL AUTOMATIC

CONTROL PANEL FULLY AUTOMATIC SYSTEM FEATURES

CONTROL PANEL AUTOMATIC

In the control panel of the recorder you can work in a TOTALLY AUTOMATIC way and in a commanded way that is to say SEMI-AUTOMATIC – where all the operations are managed from the control panel for example; The tracks of the songs are separated by a “Separtion” button where the acceleration speed is set to generate the separation between tracks, therefore, a second button of “closing spiral” to accelerate the closing of the disc.
The distance between grooves in the recording is variable by means of a potentiometer that works in conjunction with the variable acceleration scale of the tangential mechanism for the provision of automatic distance between grooves.
It can also work fully automatically, where all parameters are entered into the memory of the automatic controller. The machine starts repeating complete disc recording cycles, generating the number of tracks, the silence spaces, the disc closure, and the auto-positioning of the recording head. It even sends a signal through USB to give PLAY – STOP in the computer player, that is, the cutting head looks for the outer edge of the disk where the recording will begin, then it goes down very slowly generates a 3-slot DISC START then the machine sends the -PLAY-signal to the computer and the music begins to play everything automatically then records the number of programmed songs generating the spaces of silence (SEPARATION), when the last song ends AUTOMATICALLY CLOSES THE CONCENTRIC SPIRAL AND raises the cutting head and it returns to its original position to wait for the (START) command for the next disc, thus repeating side A or side B)
The machine includes a 16 “turntable in 8 cm thick solid aluminum with a weight of 20kg (IE A TURNTABLE WEIGHING 20KG) driven by a microcontroller servo motor with (ENCODER), a rubber band transmission system cylindrical -motor -flat. (generating a torque greater than 150kgF) in the rotation of the 20kg weight plate
The 8 cm thick solid aluminum platter has a single 16 inch piece carved on the 33/3 rpm 45rpm, 78rpm strobe scale
also features a variable speed Pith in a range of 5 RPM to 78 RPM
THIS TURNAMESA WEIGHTS 28KG IN ITS ENTIRETY AND DUE TO THE FORCE OF THE 20KG TURNING PLATE. IT MUST BE FITTED – THAT IS FASTENED BY HOLDING BOLTS AGAINST THE WORKTOP WHICH MUST BE STRUCTURALLY SOLID
The machine works with a power signal of 300 WRMS, therefore it must have an amplifier that is externally connected with extensive functions.
THE MACHINE HAS A CHIP SUCTION TUBE IN WHICH YOU MUST PLACE A DOMESTIC OR INDUSTRIAL VACUUM CLEANER
In the automatic vinyl recorder c6-v3 it is not necessary for you to remain physically in front of the machine during the recording, the machine does all the work and you only have to exchange the discs… ..

FULL RECORDING OF A 7″ 10″ 12″ 14″ 16″DISC

REMOVABLE HEAD SYSTEM SUITABLE FOR INTERCHANGEABLE HEADS

DISC CLOSING FUNCTION VINYL DISC – RECORDER AUTOMATIC SEPARATION BETWEEN TRACKS

DISC CLOSING FUNCTION VINYL DISC RECORDER
AUTOMATIC SEPARATION BETWEEN TRACKS

In the automatic vinyl recorder C6-V3 it is not necessary that you remain physically in front of the machine in the recording, the machine does all the work and you only have to exchange the discs …..